Dial Gauge, Digital MarCator0,0005 / 50mm 1087R MAHR
Version: clamping pin and measuring pin made of hardened stainless steel.The height of the digits on the LCD display 8.5 mm, the working element and the display rotated by 280 °.With M2.5 measuring tip.8 mm diameter mandrel, protective cap on the measuring tip.With radio data output, RS232, USB and Digimatic.Supplied with CR2450, 3V battery.
Functions: automatic switch-on and switch-off, mm / inch switch, automatic switch-on by pushing the button, button lock for preset zero position, no need to reset after switching on (Absolut system), MAX memory / MIN for searching for a turning point, input of tolerances, ABS (switch from relative to absolute measurement), reset (zeroing) possible in any position, reverse counting, preset function (preset measurement value).
Technical parameters:
- Measuring range: 50.0 mm
- Reading: 0.0005 mm
- Case Ø: 60.5mm
- Accuracy: 0.004mm
- HAGNo .: W488