Core drill.HSS TiAlN Weldon shank 12 / 30mm, FORMAT
Manufacturer
FORMAT
EAN
4317784561136
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Manufacturer
FORMAT
EAN
4317784561136
HSS core drill bit, cutting depth 30 mm
Type: drilling depth up to 30 mm, with 19 mm Weldon shank, CBN deep ground, right-hand cut.
Application: for use in magnetic or pillar drilling machines with Morse taper seat.The core drill bit only cuts a thin ring of material.The remaining core is pushed through the ejector pin by the force of the spring.The chips are quickly discharged to the outside, minimizing the risk of tool breakage.Even large drill hole diameters require relatively little energy.Compared to a twist drill, the core drill cuts only a small part of the total area.As a result, very high energy and time savings are achieved.
Technical parameters:
- drill Ø: 12 mm
- Steel & lt; 700 N / mm2: 30
- Steel & lt; 1000 N / mm2: 20
- INOX ferrite./ martenz .: 15
- INOX austenit .: 15
- INOX duplex: 15
- Aluminum & lt; 8% silicon: 30
- Aluminum & gt; 8% silicon: 30
- HAGNr .: W123