merXu

Cancel
Connection hose M10x3 / 8 for batteries Polymer 500mm

Connection hose M10x3 / 8 for batteries Polymer 500mm

Manufacturer
Tucai
Manufacturer Code
TU-203026
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Parameters
Manufacturer
Tucai
Manufacturer Code
TU-203026
Description

It has an internal pipe made of ecological EPDM material, which is ideal for connection hoses.Durability, flexibility and resistance of the material gives you the certainty of many years of work, as evidenced by the manufacturer by giving a long warranty.

Before you buy cheaper, check the WARRANTY - you have 10 years with us

The manufacturer of the TUCAI hoses guarantees 10 years of failure-free operation of the hoses from the date of production, which is stamped on the clamp.

They work with glycol!

Additionally, the manufacturer of TUCAI hoses declares that TAQ, TAQ FORTE, TAQ SUPER, TAQ EXTRA, RIVER BAT and RIVER connection hoses are suitable for distributing water with glycol with the assumptions:

  • Ethylene glycol, chemical designation CAS number 107211, maximum concentration 60%.
  • Ethylene glycol mono butyl ether, chemical designation CAS number 111762, maximum concentration 60%.
  • Glycolic acid, aqueous, chemical substance number CAS 79141, maximum concentration 40%.
  • Glycolic acid butyl ester, chemical designation CAS number 17397628, maximum concentration 60%.
  • Ethylene glycol mono-ethyl octane ether, chemical designation CAS number 111159, maximum concentration 60%.

Extremely flexible

Tucai hoses are very flexible so they won't stick out much from the wall at the water supply, making it easier for you to maneuver the hose when space is limited.

Minimum bend radius in the following hose series:

DN Minimum bend radius

DN13 45mm

DN15 55mm

DN19 70mm

DN25 100mm

DN30 190mm

DN40 230mm

DN50 300mm


Standard threads

Our hoses have standard threads commonly used in construction so they will fit without any surprises.


You bought a tap at a DIY store with an M8 thread, and the hoses are too short?

Nothing difficult!All you need to do is buy from us a hose with an external thread that will fit the fitting you have at home (standard is 3/8 "or 1/2").You screw it on and it's ready!

♻️ Not only will you save less by spending less on a shorter hose, you will also use the existing one, so you can breathe our planet by creating less waste.

It is worse because your M8 threaded hose should be replaced?

No problem!Buy our M8 adapter for M10 hose and enjoy a lower price!* Just twist it with the hose and it's ready!

* Applies only to the bundle above the listing description.


Convenient extended tip

For greater convenience, a special extended tip has been used in the hose, which will significantly facilitate the installation of the hose to the battery.

One Request, Multiple Quotes
Request for quotes by telling supplier what you need.