merXu
Cancel

Bow rope clamp V4 3mm 5 pcs.

Product code
RZ3.5
Length
0
Diameter
3
€3.65 +VAT
PLN 17.07
1 pc.
€3.65 +VAT
PLN 17.07
1 ×
PLN 17.07 +VAT
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Condition new
  • Minimum order volume 1 pc.
  • Country of dispatch Poland
  • Destination countries Poland
  • Available payment methods
    • Wire transfer
DQ
DQ-PP Sp. z o.o.
verified supplier
Contact supplier
See all offers
see report
Parameters
Product code
RZ3.5
Length
0
Diameter
3
Description
Material:

Acid-resistant stainless steel, V4A

AISI 316, steel grade 1.4401.

Quantity:

5 pcs.

Product characteristics:

They are used to clamp and connect steel and synthetic fiber ropes.Used in construction, horticulture, and the advertising industry.We use clamps for multi-strand ropes.The size of the clamp determines the size of the appropriate rope.In combination with a thimble (thimble size determines the appropriate rope size), you can make an "eyelet" at the end of the rope to protect the rope against abrasion and deformation.When assembling the clamps, make sure that the free (shorter end - the so-called "dead") rope is placed towards the rounded part of the clamp (bail), and the longer one (carrier rope) is in the socket (on the side of the clamp nuts).The order of tightening the clamps: the first - the farthest from the eyelet, the next - the middle ones.The distance between the clamps and the end of the dead end should be at least the width of the clamp base, the cut end of the rope should be protected against splitting of the wires.After tightening the clamps, load the rope with the maximum load expected during use and tighten the nuts again.

Product Category: RZ