Bostik Ardaflex Super PALETTE | 25 kg mortar for gluing ceramic and porcelain tiles
PRODUCT DESCRIPTION
Ardaflex Super is a thin-layer, flexible, adhesive cementitious mortar with high initial tack.The cured mortar is resistant to moisture and frost.
APPLICATION
For gluing wall and floor ceramic tiles (also made of fine stoneware) and glass and porcelain mosaics on surfaces inside and outside buildings and under water.It is also suitable for gluing natural and artificial stone slabs.Ardaflex Super mortar is especially recommended for substrates with critical adhesion, e.g. fair-faced concrete, mastic asphalt and anhydrite screed, for old ceramic tiles, plasters and gypsum boards, as well as for gluing on surfaces where movements caused by temperature differences can be expected, e.g. for heated floors or on balconies, terraces and facades.
TYPES OF SURFACE
Concrete, lightweight concrete, cellular concrete, cement screed, anhydrite screed, cement, lime and gypsum plasters, plasterboards and gypsum fibreboards, mastic asphalt screeds, as well as old tiles.
SURFACE PREPARATION
The substrate must be sound, dry and free from any contamination and release agents.Anhydrite screeds should be sanded, vacuumed and dried properly (bound moisture content <0,5%, for heated floors: <0,3%).Screeds of heated floors must be made in accordance with the standard, heated and cooled down (confirmed by a heating protocol).The bound moisture for cement screeds is <2,0%, and for heated: <1,5.Cast asphalt screeds must be sanded.When laying chipboards, it is necessary to lay a partition of insulation boards.In the case of new surfaces, wait until they achieve their final parameters: - concrete slabs:1 month - concrete walls and floors:2 months - cement screed:28 days - internal cement plasters:7-14 days - external cement plasters:3 weeks.Anhydrite screed should be primed with Ardagrip Classic.Old tiles should be sanded and primed with Ardagrip Xpress.Internal under-tile insulation should be made with Ardatec Flexdicht, and external insulation (balconies, terraces) with Ardatec 1K Flex, Ardatec 2K Flex, Turbotec 2K+ or Aqua Blocker in combination with sand.Old semi-flexible boards should be dismantled, washed and then primed.All substrates must be made in accordance with the building practice.
TOOLS
Mortar mixer, notched trowel, spatula, container.
WEAR
About 3 kg/m2 (depending on the notched trowel used).
CLEANING
Clean with clean water immediately after use.
DRYING TIME
By default it is from 24 down 48 hours.Drying time depends on the type of substrate and temperature.
COMMENTS
Read the data on the label and the product safety data sheet.
DELIVERY RANGE
Bag 25 kg.