Bistable relay 230V 16A contact 1 NO

How does a bistable relay work?The operation of the bistable relay consists in switching on the receiver after the current impulse.The impulse is caused by pressing any momentary button (bell) connected to the relay.The receiver will be turned off after the next impulse or after a power failure.ATTENTION!BIS-408-LED can cooperate with illuminated buttons.Power table Power supply: 230 V Max load: 16 A (160 A / 20 ms) Connection: screw terminals Works with illuminated buttons.The electronic bistable relay enables switching on the lighting or other device from several different points using the control buttons connected in parallel.Features: Power consumption: 0.7 W Operation delay: 0.1 ÷ 0.2 s Control impulse current: less than 5 mA Tightening torque: 0.4 Nm Cooperation with illuminated buttons: YES Executive element: relay Functionality: on / off On-time function: NO Number of channels: 1 Contact configuration: 1 × NO Contact separation: NO Resistance to surge currents - cooperation with LED: YES Local control: YES Dedicated inputs of central control: NO Radio control: NO State memory after power failure: NO Maximum load current AC-1: 16 A (160 A / 20 ms)