merXu
Cancel
Assembly foam BL6 low-expansion hobby - spray 750ml

Assembly foam BL6 low-expansion hobby - spray 750ml

EAN
8592860801313
Manufacturer
BL6
basic price
€4.29 +VAT
1 pc.
CZK 105.79
99+ pcs.
€4.11 +VAT
1 pc.
CZK 101.56
252+ pcs.
€4.03 +VAT
1 pc.
CZK 99.44
514+ pcs.
€3.94 +VAT
1 pc.
CZK 97.33
1,051+ pcs.
€3.86 +VAT
1 pc.
CZK 95.21
€4.29 +VAT
CZK 105.79
1 ×
CZK 105.79 +VAT
(1 pc. )
or
  • Full flexibility
  • Need help?
Parameters
EAN
8592860801313
Manufacturer
BL6
Description
Assembly foam BL6 low-expansion hobby - spray 750ml Characteristics of BL6 assembly foam low-expansion hobby - spray 750ml: One-component polyurethane foam, vulcanizing with air humidity.Packaging: spray 750 ml.Use of BL6 assembly foam low-expansion hobby - spray 750ml: Suitable for assembly of windows, doors and similar building elements with a requirement for lower foam foam - especially suitable for small anchor joints, where there is a risk of deformation of door frames and frames due to high foaming.It can be used for filling cavities, openings, penetrations, for insulating water pipes, boilers - always with regard to lower foaming.It creates a semi-rigid foam structure that can be modified - cut, plastered, painted.The foam does not resist UV radiation.Appearance: foaming liquid Non-stick: 10 - 15 min.Cuttability: 25 - 30 min Application temperature: + 5 ° C to + 40 ° C Thermal resistance: -40 ° C to + 90 ° C UV resistance: no Storage temperature: + 5 ° C to + 25 ° C Storage time: 18 months Application procedure: 1) Substrates must be dusted, degreased, they may be damp, but not frosted or under water. 2) The foam dose before application should have a temperature from + 5 ° C to + 35 ° C (ideally + 20 ° C), the dose is necessary min. Shake horizontally for 1 minute before application. 3) Then the application tube - in the SPRAY design - is screwed on or the can is screwed on the application gun - the GUN design. 4) Fill the space to be filled to the maximum halfway, the foam becomes intensive. 5) Remove fresh foam with BL6 Foam Cleaner or BL6 Silicone and Foam Remover, dry foam only mechanically.