Abrasive tape in a roll POLIROLL12x35mm K150 Pferd
Manufacturer
PFERD
EAN
4007220152430
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Manufacturer
PFERD
EAN
4007220152430
Roller abrasive belt POLIROLL®, K 150, cylindrical
Execution: resin-bonded coated corundum (A), on a spiral-wound fabric base.After the outer abrasive cloth has worn out, fresh abrasive grain is used.With very good cutting performance.Always sand with the tip and not the surface, otherwise the bonding will be damaged by the heat.
Application: for steel and cast iron.For machining holes, fillet welds and deburring cast iron.
Technical parameters:
- Ø x height: 12 x 35 mm
- Recom. speed: 12,000 min-1
- max. rotational speed: 17000 min-1
- Steel: recommended
- Cast iron: recommended
- Aluminum: suitable under certain conditions
- Non-ferrous metal, soft: recommended
- Non-ferrous metal, hard: recommended
- Plastic / GRP: recommended
- Wood: recommended
- Color / varnish: recommended
- HGNr .: W860