Abrasive belt, ceramic grain 50x1000mm K60 VSM
XK870X
Type: full synthetic resin bonded, self sharpening ceramic grain (CER) < b> on a durable fabric. With cooling properties due to the additional coating affecting the grinding process, even and slightly open dispersion pattern.With very good grain adhesion, extremely long life with low to medium pressure and very good adaptability. Resistant to oils, fats, waxes and water / emulsions.
Application: for aggressive grinding without overheating high-alloy steels, titanium and nickel alloys.Due to its high hardness, it is suitable for processing very hard surfaces. Active grinding additives enable grinding while cooling and thus significantly increase the cutting performance.At the same time, this enables the tool life to be extended and the discoloration of the workpiece surface is reduced. Suitable for dry machining as well as coolant machining.
Technical parameters:
- Graining: 60
- INOX: recommended
- Aluminum: useful under certain conditions
- Non-ferrous metals: recommended
- Superalloy: useful under certain conditions
- HAGNo .: W846