3-jaw lathe chuck, DIN55027, steel. 200mm KK5RÖHM
EAN
4019208025575
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
EAN
4019208025575
Three-jaw lathe chuck, with spiral ring, with short taper chuck, DIN 55027, steel body, Röhm
Type: with direct clamping.Cast iron or steel body with one-piece jaws and a spiral ring, self-centering.
Application: for universal use on lathes, rotary tables, dividers etc., where high clamping forces, low radial runout and high repeatability are required.
Scope of delivery: Three-jaw lathe chuck with clamping key and clamping screws, with one-piece reversible jaw set (for use as lathe and drilling jaws).
Note: Spare jaws must be ordered separately.
Type: with direct clamping.Cast iron or steel body with one-piece jaws and a spiral ring, self-centering.
Application: for universal use on lathes, rotary tables, dividers etc., where high clamping forces, low radial runout and high repeatability are required.
Scope of delivery: Three-jaw lathe chuck with clamping key and clamping screws, with one-piece reversible jaw set (for use as lathe and drilling jaws).
Note: Spare jaws must be ordered separately.
Technical parameters:
- Size A: 200mm
- Size: 8 inch
- Short taper: 5 </ li >
- Through hole diameter E: 55mm
- Taper B size: 82.5mm
- Height D: 80.2mm
- Radial runout tolerance : 0.06mm
- Max. rotational speed: 4000 min-1
- HGNr .: W301