merXu
Cancel

Protective pipes and hoses

(6,350 results)
Sort by
Installation switch Ospel ŁP-12WS/45 KIER Push-in clamp Plastic IP20

Installation switch Ospel ŁP-12WS/45 KIER Push-in clamp Plastic IP20

€4.02 +VAT
PLN 18.88
  • Manufacturer: Ospel
  • Manufacturer Code: ŁP-12WS/45
  • EAN: 5907577473556
  • Wiring system: 2-pole switch
  • Method of operation: Rocker/button
  • Assembly arrangement: Basic element with complete housing
  • Mounting method: Flush mounted (plaster)
  • Type of fastening: Mounting with claw and screw
Supplier:
Response time: usually up to 3 days
Installation switch Ospel ŁP-4J/m/00 GAZELA White Push-in clamp Plastic IP20

Installation switch Ospel ŁP-4J/m/00 GAZELA White Push-in clamp Plastic IP20

€3.91 +VAT
PLN 18.33
  • Manufacturer: Ospel
  • Manufacturer Code: ŁP-4J/m/00
  • EAN: 5907577428303
  • Wiring system: Intermediate switch
  • Method of operation: Rocker/button
  • Assembly arrangement: Basic element with complete housing
  • Mounting method: Flush mounted (plaster)
  • Type of fastening: Mounting with claw and screw
Supplier:
Response time: usually up to 3 days
Installation switch Ospel ŁP-1RS/m/38 SONATA Silver Push-in clamp Plastic IP20

Installation switch Ospel ŁP-1RS/m/38 SONATA Silver Push-in clamp Plastic IP20

€4.31 +VAT
PLN 20.20
  • Manufacturer: Ospel
  • Manufacturer Code: ŁP-1RS/m/38
  • EAN: 5907577447212
  • Wiring system: Off switch 1-pole
  • Method of operation: Rocker/button
  • Assembly arrangement: Basic element with complete housing
  • Mounting method: Flush mounted (plaster)
  • Type of fastening: Mounting with claw and screw
Supplier:
Response time: usually up to 3 days
Installation switch Ospel ŁNH-4D/30 DELFINA Grey Push-in clamp Plastic IP44

Installation switch Ospel ŁNH-4D/30 DELFINA Grey Push-in clamp Plastic IP44

€3.44 +VAT
PLN 16.15
  • Manufacturer: Ospel
  • Manufacturer Code: ŁNH-4D/30
  • EAN: 5907577408732
  • Wiring system: Intermediate switch
  • Method of operation: Rocker/button
  • Assembly arrangement: Basic element with complete housing
  • Mounting method: Surface mounted (plaster)
  • Type of fastening: Mounting with claw and screw
Supplier:
Response time: usually up to 3 days
Installation switch Ospel ŁP-1JS/m/00 GAZELA White Push-in clamp Plastic IP20

Installation switch Ospel ŁP-1JS/m/00 GAZELA White Push-in clamp Plastic IP20

€3.56 +VAT
PLN 16.69
  • Manufacturer: Ospel
  • Manufacturer Code: ŁP-1JS/m/00
  • EAN: 5907577428259
  • Wiring system: Off switch 1-pole
  • Method of operation: Rocker/button
  • Assembly arrangement: Basic element with complete housing
  • Mounting method: Flush mounted (plaster)
  • Type of fastening: Mounting with claw and screw
Supplier:
Response time: usually up to 3 days
Installation switch Ospel ŁN-3BS/00 BIS White Push-in clamp Plastic IP20

Installation switch Ospel ŁN-3BS/00 BIS White Push-in clamp Plastic IP20

€2.54 +VAT
PLN 11.93
  • Manufacturer: Ospel
  • Manufacturer Code: ŁN-3BS/00
  • EAN: 5907577425715
  • Wiring system: Two-way switch
  • Method of operation: Rocker/button
  • Assembly arrangement: Basic element with complete housing
  • Mounting method: Surface mounted (plaster)
  • Type of fastening: Mounting with claw and screw
Supplier:
Response time: usually up to 3 days
Didn't find what you were looking for? We will help you!

Casing pipes and hoses

Casing pipes and hoses are among the basic elements of cable management. These should always be purchased according to the intended use to ensure reliability. Only then will you not have to worry about whether you are using them in the right way. It is of course no less important to buy them from proven manufacturers on the market.

Casing pipes: characteristics

Casing pipes and hoses for laying in the ground perform very well in certain conditions. Pipes intended for electrical cables effectively protect them, as well as their task is to protect cables laid under the plaster, in the floor, on poles or above and below the ground. Due to the fact that the offer on the market is rich, you can easily choose the type of pipe for each application, both constructional and industrial. Therefore, we distinguish between construction and industrial protective pipes. Construction pipes are used directly in the ground. On the other hand, industrial pipes are resistant to UV rays, moisture, temperature differences, mechanical loads and other external factors. The choice of the protective pipe is therefore determined by the location in which it is to be laid and the exposure of cables and wires in the specific operating environment. Usually casing pipes are made of polyethylene, which effectively protects cables from destructive factors. Polyethylene is characterized by a high resistance to chemical irritants. It is also resistant to both low and high temperatures. It is also a flexible material. Protective pipes are an effective mechanical protection for power cables, electrical wires, telecommunication cables, traction signaling, cable television, and other cables and wires.

The properties of pipes laid in the ground allow them to be easily laid in different soils and with different gradients. They are extremely flexible, so they can avoid all obstacles appearing on the route of the pipeline and mitigate the effects of ground settlement. Robustly manufactured casing pipes can be easily laid in waterlogged and chemically aggressive soils.

Protective hoses: characteristics

Protective hoses are flexible and can therefore be used without problems. Their characteristics include: reliability in bundling, protecting and fixing cables, quick and easy installation, high abrasion resistance, the use of a special profile allowing the separation of cables at any point, repeated assembly and disassembly, availability in several sizes and colours. These types of hoses are flexible and are often used in control cabinets, in the electrical industry, as well as in the construction of various types of machinery and equipment. It is the ideal solution for industrial applications, allowing a specific power distribution system to work flawlessly. Protective hoses, similarly as pipes, are used for mechanical protection of cables, pipes and bundles of wires. They are very often used in places where there are robotic stations. Their spiral structure allows them to work in all axes together with the device arm. Very important is the fact that with the help of cover hoses it is possible to wrap already existing wires. The use of such elements minimizes the risk of failure in circuits. Thus, it affects the savings in a particular plant.

Casing pipes and hoses, designed primarily for laying in the ground prove ideal in the designated conditions. These elements allow you to run various types of cables without any obstacles. That is why you should always buy them for a specific purpose. Then you will not have to worry if you use them properly. It is worth buying them from manufacturers who are known to specialize in this field. Casing pipes and hoses have ideal parameters for use even in harsh conditions of use.