merXu Protected Payments
Ασφαλίστε την πληρωμή σας μέχρι την παράδοση.
Τρίγωνο τοποθέτησης Φ/Β πάνελ οριζόντια 15 μοίρες
Κατασκευαστής
INTELUS24
Υλικό
Αλουμίνιο
Προσφορά από τον προμηθευτή:
Χώρα αποστολής:
Χώρες προορισμού:
Διαθεσιμότητα:
Μέθοδοι πληρωμής που συνιστώνται από την merXu:
Εναλλακτικές μέθοδοι πληρωμής:
Κατασκευαστής
INTELUS24
Υλικό
Αλουμίνιο
Triangular bracket for mounting photovoltaic panels on a flat roof or a roof with a slight slope.The product allows for horizontal installation of panels, the angle of inclination 15° ensures optimal positioning of the panel surface in relation to the sun.
The triangle is made of aluminum angles 40x40x3 mm and is supplied with a set of screws enabling the screwing of all three elements together.The hypotenuse of the triangle has 2 holes for attaching mounting profiles to it.
Specification:
Dimensions trójkąta:84 x 26,5 x 95,5
Dimensions of angles: 40 x 40 x 3 mm
Inclination angle: 15°
Panel orientation: horizontal
Material: aluminum
Hexagonal screw - 3 pcs.
Flange nut - 3 pcs.
Application
Correct installation of photovoltaic panels on the roof requires the use of a number of closely matched elements.Mounting elements for photovoltaic panels vary depending on the roof on which the structure is to be placed.Moreover, in the case of pitched roofs, the elements are also selected according to the type of roofing.The presented product can be used to create mounting structures for a flat roof.
Flat roof construction
Mounting structure enabling the mounting of photovoltaic panels on a flat roof.To achieve a sufficiently high electricity yield, photovoltaic panels must be mounted at an angle relative to the angle of incidence of sunlight.In Polish conditions, the optimal installation angle of solar panels is approximately 30°,, which in the case of flat roofs necessitates the use of special supporting structures.When planning the installation of photovoltaic panels on a flat roof, in addition to maximizing the electricity yield, you should also take into account such aspects as: proper protection of the structure against gusts of wind, roof load-bearing capacity, number of panels.
Assembly triangles are fully made by us, order processing time is 2-3 working days.It is also possible to order non-standard dimensions upon request.
The triangle is made of aluminum angles 40x40x3 mm and is supplied with a set of screws enabling the screwing of all three elements together.The hypotenuse of the triangle has 2 holes for attaching mounting profiles to it.
Specification:
Dimensions trójkąta:84 x 26,5 x 95,5
Dimensions of angles: 40 x 40 x 3 mm
Inclination angle: 15°
Panel orientation: horizontal
Material: aluminum
Hexagonal screw - 3 pcs.
Flange nut - 3 pcs.
Application
Correct installation of photovoltaic panels on the roof requires the use of a number of closely matched elements.Mounting elements for photovoltaic panels vary depending on the roof on which the structure is to be placed.Moreover, in the case of pitched roofs, the elements are also selected according to the type of roofing.The presented product can be used to create mounting structures for a flat roof.
Flat roof construction
Mounting structure enabling the mounting of photovoltaic panels on a flat roof.To achieve a sufficiently high electricity yield, photovoltaic panels must be mounted at an angle relative to the angle of incidence of sunlight.In Polish conditions, the optimal installation angle of solar panels is approximately 30°,, which in the case of flat roofs necessitates the use of special supporting structures.When planning the installation of photovoltaic panels on a flat roof, in addition to maximizing the electricity yield, you should also take into account such aspects as: proper protection of the structure against gusts of wind, roof load-bearing capacity, number of panels.
Assembly triangles are fully made by us, order processing time is 2-3 working days.It is also possible to order non-standard dimensions upon request.