merXu Protected Payments
Sikre din betaling indtil levering.
SPRSUN varmepumpesæt 22kW + buffer 100L,zasobniki300L, pumper, materialer
Tilbud fra leverandøren:
Afsendelsesland:
Bestemmelseslande:
Anslået forsendelsesdato:
Betalingsmetoder anbefalet af merXu:
Alternative betalingsmetoder:
22kW SPRSUN HEAT PUMP KIT FOR SELF-INSTALLATION
+ Buffer 100L and container 270L
+AKCESORIA MOUNTING
We present a complete kit for installing a heat pump in central heating and domestic hot water, which can be installed by the buyer himself or by an installer.
A pump with a thermal power of 22kW is sufficient to heat a well-insulated house with underfloor heating with an area of approximately 500m2.It is not worth oversizing the pump, i.e. using too powerful one.In severe frosts, the heater will turn on for some time (applies to temperatures below -15 degrees), but at typical temperatures, i.e. around zero degrees, the pump will operate stably in long cycles, which extends its life and improves efficiency (the catalog efficiency is achieved after a few or even a dozen or so minutes of work).
The set includes a modern inverter pump in which the compressor and fan have adjustable speeds.Thanks to this, the pump automatically regulates the operating speed and, consequently, the efficiency.This increases the durability of the pump because the compressor turns off very rarely (several times a day)
The set contains all the necessary elements for installing central heating in your home with a heat pump (after purchasing the 3-drożnego valve, it can also be used as a heat pump for domestic hot water).
The set does not include installation pipes (1 inch) and several joints or connectors (e.g. from 1 inch to 3/4 inch).These elements can be purchased at any plumbing store.We do not offer them in a set because it is impossible to estimate the exact number of pipes, and transporting the pipes is quite expensive due to their weight and size.
We encourage you to purchase our guide on heat pumps:
https://www.solarne.info/sam-instaluje-pompe-ciepla-poradnik-instalatora-wersja-10-z-dnia-6042021r-p-1940.html
This guide is available free of charge when purchasing a heat pump for 10 PLN
Due to the value and weight, the goods are delivered on pallets.
The assembly and installation of a heat pump is simple (much simpler than, for example, a gas furnace).You can do it on your own or use the help of a plumber.
The electrical connection should be made by an electrician in accordance with the regulations.
Estimated additional costs:
Electrical services approx 8 hours, cost 1200 PLN
Plumbing services approx 16 hours, cost 2400 PLN
+ Buffer 100L and container 270L
+AKCESORIA MOUNTING
We present a complete kit for installing a heat pump in central heating and domestic hot water, which can be installed by the buyer himself or by an installer.
A pump with a thermal power of 22kW is sufficient to heat a well-insulated house with underfloor heating with an area of approximately 500m2.It is not worth oversizing the pump, i.e. using too powerful one.In severe frosts, the heater will turn on for some time (applies to temperatures below -15 degrees), but at typical temperatures, i.e. around zero degrees, the pump will operate stably in long cycles, which extends its life and improves efficiency (the catalog efficiency is achieved after a few or even a dozen or so minutes of work).
The set includes a modern inverter pump in which the compressor and fan have adjustable speeds.Thanks to this, the pump automatically regulates the operating speed and, consequently, the efficiency.This increases the durability of the pump because the compressor turns off very rarely (several times a day)
The set contains all the necessary elements for installing central heating in your home with a heat pump (after purchasing the 3-drożnego valve, it can also be used as a heat pump for domestic hot water).
The set does not include installation pipes (1 inch) and several joints or connectors (e.g. from 1 inch to 3/4 inch).These elements can be purchased at any plumbing store.We do not offer them in a set because it is impossible to estimate the exact number of pipes, and transporting the pipes is quite expensive due to their weight and size.
We encourage you to purchase our guide on heat pumps:
https://www.solarne.info/sam-instaluje-pompe-ciepla-poradnik-instalatora-wersja-10-z-dnia-6042021r-p-1940.html
This guide is available free of charge when purchasing a heat pump for 10 PLN
Due to the value and weight, the goods are delivered on pallets.
The assembly and installation of a heat pump is simple (much simpler than, for example, a gas furnace).You can do it on your own or use the help of a plumber.
The electrical connection should be made by an electrician in accordance with the regulations.
Estimated additional costs:
Electrical services approx 8 hours, cost 1200 PLN
Plumbing services approx 16 hours, cost 2400 PLN