Zrušit

SANITÁRNÍ SILIKON CS25 SEALANT SIENA 280ml CERESIT

Tato nabídka není aktivní. Založte poptávku a získejte nabídky od více prodejců.

Popis

Ceresit CS 25 silicone is used to fill joints between ceramic tiles in wall corners and in wall-to-floor joints, and to fill gaps between tiles and sanitary facilities .Provides a tight connection in places where ordinary welds crack.Due to its permanent elasticity and water resistance, CS 25 is suitable for sealing expansion joints through wet rooms.The silicone is intended for use in bathrooms, kitchens, toilets, shower cabins , as well as outdoors .

offered in colors corresponding to the colors of Ceresit joints
contains fungicidal substances, thanks to which it is resistant to the appearance of efflorescence
strong>

ensures tight connection in places where ordinary joints break.

It has a hygienic certificate of the National Institute of Public Health - National Institute of Hygiene for contact with drinking water No.HK / W / 0124 / 01/2017.
waterproof
has excellent adhesion to dry, low-absorption substrates such as: glass, glazed ceramic tiles, porcelain, faience and enamel elements

The new CS 25 MicroProtect formula contains active substances that block the growth of fungi and mold in 3 ways: minimize the possibility of the formation of mold spores, inhibit their growth and the possibility of spreading. This ensures long-lasting protection against fungi and mold, and the fungicides contained in silicone make the joints that do not retain water remain clean and shiny.

The material has excellent adhesion to dry, low-absorbent substrates such as: glass, glazed ceramic tiles, porcelain, faience and enamel elements.

Biocidal products should be used with care.Before each use, read the label and product information.

Base: acetate silicone
Density: approx. 1.0 g / ml
Application temperature: from +5 ° C to +40 ° C
Surface drying time: approx. 15 min
Temperature resistance: from –40 ° C to + 120 ° C
Hardening time: approx. 3 mm within 24 hours
Joint width: from 5 to 30 mm
Resistance to running off: ≤ 3 mm according to EN 15651-1: 2012 / ≤ 3 mm according to EN 15651-3: 2012
Loss of volume: ≤ 25% according to EN 15651-1: 2012 / ≤ 30% according to EN 15651-3: 2012

< / strong>
Tensile characteristics for water immersion: ≥ 100% at 23 ° C acc. to 15651-1: 2012 / ≥ 25% at 23 ° C acc. to EN 15651-3: 2012
Microbiological development: 1 according to EN 15651-3: 2012
Packaging efficiency: approx. 15 m with a 6 x 6 mm joint

PACKAGING: 280 ML
COLOR: SIENA

Nakupujete na merXu poprvé?

Je to snazší, než si myslíte. Máme pro vás jednoduchý návod.

Vyjednávejte s prodejcem

Před provedením nákupu můžete kontaktovat prodejce pro úpravu vaší objednávky, vyjednání ceny nebo s dotazem na další nabídky z jeho portfolia. Klikněte na nabídku, která vás zajímá. Najděte tlačítko "Odeslat poptávku" na pravé straně nabídky a budete přesměrováni přímo do chatu s prodejcem.