MAAD ZW-1300 / 0,8 / EL VÁLCOVACÍ STROJ ELEKTRICKÝ VÁLCOVACÍ STROJ 1-FÁZOVÝ VÁLEC NA PLECH MAAD ZW-1300 /0,8mm EL
SHEET ROLLER MAAD ZW-1300 / 0.8 / EL SHEET MACHINE with electric drive
1-PHASEMAAD ZW-1300 / 0.8 / EL machine is ideal for roofing work such as gutters and downspouts.Thanks to the use of proven and durable technical solutions, the machine can be used for many years without failure. The ZW-1300 / 0.8 / el bending machine is a machine used for coiling, unrolling cylindrical pipes, conical pipes with low taper, gutters and all kinds of metal sheets up to the thickness of 0.80 mm and tensile strength Rm up to 400 MPa.
The main working elements of the coiler are 3 shafts.Two of them located in the front part of the machine (upper and lower) perform the function of pulling the rolled sheet metal.The third, at the back of the device, the so-called loose thanks to the adjustment of the position, it gives the appropriate diameter of the processed sheet.Thanks to the additional milling in the upper shaft, it is possible to make locks for downpipes on the winder.The upper shaft, detachable on one side, allows for quick removal of the workpiece.An additional chain transmission in the coiler, which drives the idler shaft, improves the working parameters during coiling.
The use of the inverter in the electrical system allows for a stepless adjustment of the rotational speed of the working shafts from the inverter's front plate or the potentiometer located at the machine's control pedals (activating left and right rotation).You do not need a three-phase power supply to drive the coiler - the power supply is single-phase 230 V.
The machine is equipped with a safety switch and has a declaration of conformity with European Union standards.
Technical parameters:
- Max. sheet thickness: 0.8 mm for Rm & lt; 400 MPa
- Motor power: 1.1 kW
- Geared motor gear: 1:30
- Machine power: single-phase
- Shafts rotational speed top and bottom: 0 - 24 rpm
- The speed of the processed sheet: 0 - 4.5 m / min
- The maximum width of the sheet: 1.250 mm
- Diameter of working rollers: 60 mm
- Minimum diameter of the sheet to be rolled: 80 mm
- Weight: 140 kg
Machine dimensions: < / strong>
- height - 1.100 mm
- width - 1.800 mm
- depth - 700 mm
The upper shaft is detachable with a milled groove.
- CE MARK
- Left and right rotation
- Adjustable speed thanks to the use of 0-50 rpm inverter./ min
- Emergency stop
- Use of branded components
- Engine power 1.1 kW, 1400 rpm./ min
- Worm reducer
The elements of the coiler are made on precise CNC machine tools.
The coiler is covered with a double layer of high-quality paint - the painting process is performed in a professional, heated and ventilated paint shop.