Drazice OKC 500 NTR/HP за термопомпи ДОСТАВКА в Словакия НЕ ТАКСУВАМЕ

WE DO NOT CHARGE DELIVERY within Slovakia, DISCOUNT after registration...Description: VOLUME L 469 HEIGHT mm 1914 DIAMETER mm 700 MAXIMUM WEIGHT WITHOUT WATER kg 223 MAXIMUM OPERATING PRESSURE IN THE TANK bar 10MAXIMÁLNY OPERATING PRESSURE IN THE EXCHANGER bar 10MAXIMÁLNA HEATING TEMPERATURE WATER °C 110MAXIMÁLNA HOT WATER TEMPERATURE °C 80VÝHREVNÁ EXCHANGER AREA m2 6,4 EXCHANGER VOLUME L 39 ENERGY EFFICIENCY CLASS CSTATIC LOSS W 105Nepriamo heated stationary heater OKC %p12/ % (250, 300, 400, 500, 750, 1000) NTR/HP is designed for DHW preparation in connection with a heat pump.Reheating can be done with an electric body TJ 6/4“.The heater container is welded from sheet steel and as a whole is protected by enamel that resists hot water.As an additional protection against corrosion, a magnesium anode is installed in the container, which adjusts the electrical potential of the inside of the container and thus reduces the effects of corrosion.Inside the container is welded one spiral heat exchanger made of steel, externally enamelled pipe, and then hot and cold water connection, circulation and thermostat tank.In the lower part of the heater, there is an inspection flange hole for cleaning the inside of the container. Preparation of hot water all year round with heated water from the heat pump. The tube exchanger is intended only for the heating circuit. On the side of the heater there is a cleaning and inspection hole, ending in a flange with a clearance of 110 mm, distance between the screws M8 is 150 mm.A TPK heating element can be installed in the hole. The heater is equipped with a G 11“ hole for screwing in an additional heating element.This variant is used when the heater is connected in a system with a heat pump - to reheat the water in the upper part of the heater to the required temperature.The container is insulated with 50 or 60 mm polyurethane foam that does not contain freon, the heater shell is made of plastic. The heating element is ordered separately, it is not part of the container.Spiral Dražice TPK 150-8/2,2kW ......Order number: 2110409Špirála Dražice TPK 150-8/3,3kW ......Order number: 2110427 - for tanks made after 03/2023 it is possible mount only TPK made after 03/2023 Spiral Dražice TPK 150-8/3,3kW 1 sump ......Order number: 2110435 The heating element is ordered separately, it is not part of the reservoir.Spiral Dražice TJ 6/4" 2kW insulated with extension. the cold.Part of ... 2110353Špirala Držice TJ 6/4" 2,5kW insulated with ext. the cold.In part... 2110354Špirala TJ track 6/4" 3,3kW insulated... 2110355Špirala TJ track 6/4" 3,75kW insulated with ext. the cold.Časťou...2110356Špirala TJ track 6/4" 4,5kW insulated with ext. the cold.Časťou...2110357Špirala TJ track 6/4" 6kW insulated with ext. the cold.Časťou...2110358Špirala TJ track 6/4" E-3,75kW insulated with ext. the cold.Časťou...2110365Špirala TJ track 6/4" E-4,5kW insulated with ext. chl.Časťou...2110366Špirala TJ track 6/4" E-6kW insulated with ext. chl.Časťou...2110367Špirala Dražice TJ 6/4" S-2,5kW ext. chl. part, with stykačom...2110361 The heating element is ordered separately, it is not part of the reservoir. Spiral Dražice TPJ 150-8/2,5kW flanged Spiral Dražice TPJ 150-8/3kW flanged Spiral Dražice TPJ 150-8/4kW flanged Spiral Dražice TPJ 150-8/9kW flanged